FOTEK CONTROLS
FOTEK อีกหนึ่งแบรนด์ ที่เป็นที่นิยม ในกลุ่มโรงงานอุตสาหกรรม และ ช่างผู้ชำนาญงาน ใน ความคุ้มค่าใน การเลือกใช้ ด้วย เหตุผล ใน ความคุ้มค่า ผลิตภัณฑ์ ที่หลากหลาย ครอบคลุม ในทุกงานควบคุม จึงเป็น อีกหนึ่งแบรน ที่ทาง FON ต้องการนำเสนอ คิดถึง FOTEK คิดถึง FON
TEMPERATURE CONTROLLER
การงานควบคุม อุณหภูมิ หรือ Temperature Controller ของ FOTEK มีให้เลือกใช้หลากหลายดังที่เสนอ
Self-adaptive Fuzzy +PID Temperature Controller
NT Series Temperature Controller
- Intelligence
- Easiness
- Performance
- Stability
- Reliability
- Sensitivity
- Output volume display
- Load current display
- Turn off control function
- Fast auto – tuning setting
- Soft start function
- Ramp control function
- Manual output control function
- Communication function available
- UL approved
EX. NT/1 – 48/2R/3 – CT/4 – RS/5 |
||
1 | Series | NT=New generation Temperature controller |
2 | Outline | 10=24*48*100 20=48*96*60 21=22.6*75.100 32=32*75*65
48=48*48*72 72=72*72*60 96=96*96*60 (Unit:mm) |
3
|
Output method | R=Relay (3A/250VAC) V=SSR(30mA/12V) L=Linear output (4 – 20mA) |
4 | Optioned | CT=Current detecter mA=DCcurrent input mV=DC voltage input |
5 | Optioned | RS=RS-485 Communication (MODBUS) S=PV Resender |
Specification |
Data |
Power supply | 90 – 265 VAC/50/60 Hz or 24 VDC/AC (Optioned) |
Sensor Input |
PT/K/J/R/S/T/B/E/N/L (Settiable) or 4-mA or 0-10 ADC (optioned) |
Control method | Fuzzy+PID or ON/OFF Selectable |
Control output | Relay or SSR or 4-20mA (Optioned) |
Alarm output | Relay 1a (5A/250VAC SPDT) |
Display range | -999 – 9999 or -99.9 – 999.9 |
Setting range | -999 – 9999 or -99.9 – 999.9 |
Accuracy |
±0.1 % of FS ± 1digit |
Heat Runner controller/ Temperature controller
HR Series Heat Runner Controller
- Digitalized Phase control, Easy to control the Nozzle heater constantly
- To operate the special function of controller simply
- High speed response to detect short-circuit of load
- Complete function for Heat Runner @ Nozzle heater controller
>>Stand-by >>Manual control >>Turn off
>>Fast AT >>Soft Start >>Boost
Type | Standard | Standard+
Communication |
Short-circuit detect | Short-circuit detect+ Communication |
Model | HR-20A | HR-20A-RS | HR-20P | HR-20P-RS |
RS-48 | Non | RS-485 | Non | RS-485 |
Detect function | Sensor Break/Sensorreversed | Sensor Break/Sensorreversed
/Load short-circuit/out short-circuit |
||
spec | Stand-by/manual control/turn OFF/Fast AT/Soft start/boost |
Spec. | Data | Spec. | Data |
Conreol method | PID+Fuzzy Phase Control | Rated current | 16A/250VAC max. |
Load voltage | 90 -265 VAC 50/60Hz | Output method | Triac(40A/600VAC) or Relay (5A/250VAC) settable |
Power voltage | 90 -265 VAC 50/60Hz | Power freq. | 50/60 Hz auto detect |
Alarm output | Relay (5A/250VAC) | fuse | 20A/250 VAC |
Display range | -999 – 9999 or 99.9 -99.9 Settable | Sensor | K/J/E/L settable |
Setting range | -999 – 9999 or 99.9 -99.9 Settable | Accuracy | ±(0.1% of F.S. +1 DIGIT) |
MT Series Temperature Controller
- Fuzzy + PID control
- Multi – input: K/J/PT
- 15 Modes of alarm Optioned
- CT or RS-485 Optioned
- UL approved
EX. MT/1 – 48/2R/3– RS/4 | ||
1 | Series | MT=Micom Temperature controller |
2 | Outline | 48=48*48*72 21=22.6*75.100 72=72*72*60 96=96*96*60 (Unit:mm) |
3 | Output | R=Relay (3A/250VAC) V=SSR(30mA/12V) L=Linear output (4 – 20mA) |
4 | Optioned | CT=Current detecter mA=DCcurrent input mV=DC voltage input |
5 | Optioned | RS=RS-485 Communication (MODBUS) S=PV Resender |
Specification | Data | Spec. | Data |
Power supply | 90 -265 VAC 50/60Hz or 24VDC/AC (Optioned) | Alarm Output | Relay 1a (5A/250VAC SPDT) |
Sensor | PT/K/J (Selectable)or 4-mA or 0-10 VDC (Optioned) | Display range | -999 -9999 or -99.9-999.9 |
Control method | Fuzzy +PID or ON/OFF selectable | Setting range | -999 -9999 or -99.9-999.9 |
Control Output | Relay or SSR or 4 -20 mA (Optioned) | Accuracy | ±(0.1% of F.S. +1 DIGIT) |
TC Series Temperature Controller
- High Reliability by SMT& TQC
- With Cold-junction compensation suited to operated at -20 •C – +60 •C
- ALL type with sensor break alarm pilot.
- High accuracy of display & setting less than 0.5% FS.
- With stand-by or over – heat alarm (optioned)
- With heater break alarm (optiomed)
EX. TC/1 –4896/2 D/3 A/4– PT/5– P/63/7- P/8- A/8
|
|||||
1 | Series | TC = Temperature controller | 6
|
Out put | R=Relay/V=SSR/L=4 – 20mA /N=No output |
2 | Outline | 4896=48*96 /48=48*48 / 72=72*72*60 | 7 | Setting
range |
Digital switch:1=0 -199/ 3=0-399/ 5=0-599/ 9=0-999
Timmer: 1=0 -100 /2 =0-200 /4=0-400 /6=0-600 /12=0-1200 |
3 | Setting | D=digital switch /A=Trimmer | |||
4 | Display | A=Deviation /D=digital /N= Non display
|
8 | Control | S =ON/OFF Non = P+D ON/OFF |
5 | Optioned | PT=RTD PT-100Ω/J=J type/Non=K type (optioned) | 9 | Alarm | A=standard-by or over-heat alarm
AH=stand-by or over-heat+HBalarm |
Specification | Data | Spec. | Data |
Power supply | 110/220 VAC ±20% 50/60Hz or 24VDC/AC (Optioned) | Alarm Output | Relay or SSR or 4-20mA (optioned) |
Sensor | PT/K/J (Optioned) | Display range | Range oF VR : appr. ±10 •C |
Control method | Fuzzy +PID or ON/OFF selectable | Setting range | Relay 1a (5A/250VAC SPDT) |
Control Output | Relay :APPR.20S :SSR:Appr 2S | Accuracy | Range of VR :appr.50 •C |